Spalding M8809511 manual Contact Utilities Before Digging

1. Ensure ground is level with playing
surface, then dig pole hole.
WARNING!			PLAYING
			SURFACE
		24" (61 cm)
		36" (91.4 cm)
			GROUND
			SURFACE
CONTACT UTILITIES
BEFORE DIGGING.
2. Install nut (2) to J-bolt (1) as			2
shown. Repeat procedure for
	2-1/2”	3
other three J-bolts (1).
2	(6.35 cm)
IMPORTANT!
Make sure nuts are 2-1/2”
(6.35cm) from top of
J-Bolts.	1
				2
NOTE:
Make sure J-bolts (1) are
in the illustrated position.
3. Install threaded ends of J-bolts (1) through holes in		1
mounting plate (3) and secure as shown.
NOTE:
Nuts on the top of plate are
used for leveling the pole after
system is fully assembled.
	3	07/06	ID#	M8809511