Speco Technologies CVC6146SCFF instruction manual Motion Area Select Area Display Left / Right

NOTE

* PAN and TILT function should be available when using the digital zoom.

2-4) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.

2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 3. MOTION

MOTION
AREA SELECT	AREA
AREA DISPLAY	ON
LEFT / RIGHT	100
WIDTH	100
TOP / BOTTOM	100
HEIGHT	100
SENSITIVITY	40
RETURN

3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu.

①AREA SELECT : Determines whether the MD area selected AREA 1, 2, 3, 4.

②Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100.

③Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by using the LEFT or RIGHT button.

④Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100.

- 26 -