Speco Technologies CVC61HRW, CVC61HRB instruction manual Precautions, Features, Installation

Precautions

•To avoid electrical shock, do not open the case of this product.

•Only use a regulated DC 12V Power supply to operate this product.

•Do not overload electrical outlets or extension cords. This can result in a fire or electrical shock.

•Keep this product away from strong magnetic fields.

•Do not expose this product in direct sunlight or strong reflected rays.

•Refer servicing to qualified personnel only.

•Do not change or modify this product. This will void the warranty.

Features

•1/3” Sony Super-HAD™ CCD

•540 TV Lines Super High Resolution

•Compact Size - Only 48mm In Diameter!

•Vandal Resistant Housing

•Cast Aluminium Construction

•Integrated 3mm Fixed Lens

•Impressive Picture Quality

•Weatherproof (IP66 Rated)

•12V DC Required

Installation

1.Loosen the two locking screws①, using the supplied hex-head wrench and remove the mounting base.

2.Attach the mounting base② to a suitable solid surface, such as a wall or ceiling. On partitioning locate a wall stud or ceiling joist. Secure the mounting base using the supplied screws③. Fit the camera④ to the mounting base ② and fix in to position using the two locking screws①, secure them with the hex-head wrench.

3.How to set the angle of view:

Loosen the two locking screws①, using the supplied hex-head wrench, and set the desired camera angle by moving the camera right /left and up/down.

4.Connect the video connector (BNC) of the camera cable to the incoming video cable. The other end of the video cable should be connected to a DVR or Monitor. Plug the camera power connector (red DC jack) into the DC12V regulated power supply. Switch on the power supply and the picture will be displayed on a monitor.