41
Inter-Tel® Model 8664/8665/8668 User Guide
GETTING STARTED
DISPLAYING INFORMATION ON YOUR ENDPOINT
In addition to the four lines on the display that are dedicated to the menu, your end-
point has two lines of display where you can view information, such as the date and
time or the outside party’s name/number.

Date, Time, Name, and Extension Number

You can temporarily display the system date and time, your user name, and your
extension number at any time.
To show the date and time display (while on a call, in DND, etc.):
1. EITHER, Press - .
OR, Press until the Feat softkey is available and then press the Feat softkey.
2. Dial .

Outside Party’s Name/Number

If you are currently connected to an outside caller with Caller ID, you can toggle
between displaying the caller’s name and number.
To show the outside party’s name:
1. EITHER, Press - .
OR, Press until the Feat softkey is available and then press the Feat softkey.
2. Dial .
NOTE: If there is no outside party name available, the display shows CANNOT
ACCESS FEATURE.
USING THE MUTE FEATURE
Your endpoint has a mute feature, which, when enabled, allows you to hear the other
party but they cannot hear you. (This does not put the party on hold.)
To use the mute feature:
1. Press until the Mute softkey is available.
2. Press the Mute softkey.
To turn the mute feature off:
Press the Mute softkey.
FCN
7
FCN
3 0 0
FCN
7
FCN
3 7 9
FCN