53
Inter-Tel® Model 8664/8665/8668 User Guide
GETTING STARTED
3. Dial the two-digit number correspond ing to the message you want to use.
4. If desired, customize the second display line by dialing the desired numbers or
letters as described below:
Remain in numeric mode: Press the dialpad buttons to dial the desired num-
bers. Press for a hyphen (-), for a colon (:), the Fwd softkey to
leave a space, or press the Mute softkey to backspace.
NOTE: Press the Msg softkey to switch back and forth between numeric and
alphanumeric mode when you are customizing the second display line. When
the icon is displayed, the endpoint is in alphanumeric mode.
Change to alphanumeric mode: Press the dialpad buttons to enter the desired
characters. (Refer to the chart below.) The number of times a button is
pressed determines which character is entered. For example,
33377744432999 enters “FRIDAY.” When adjoining characters are located
under the same button, press the Fwd softkey once to advance to the next
character. For example, 6 Fwd 666 Fwd 6632999 enters “MONDAY.” (Note
that letters correspond to the letters printed on the buttons.) Press Fwd twice
to leave a space or press the Mute softkey if you need to backspace.
5. Press and then press the number that corresponds to the ACCEPT option.
*The character available depends on the software version.
To cancel DND:
1. While in idle mode, press to bring up the two-line display.
2. Press until the DND softkey is available and then press the DND softkey.
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 12345
1-&()1
2ABC' 2
3DEF! 3
4GHI *4
5JKL# or / *5
6M N O N or # *6
7PQRS7
8TUV?8
9WXYZ 9
0@:.,0
#
*
#
MENU
MENU
FCN