73
Inter-Tel® Model 8664/8665/8668 User Guide
MOVING ON
PERFORMING A “HOOKFLASH” DURING A CALL
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
1. EITHER, Press - .
OR, Press until the Feat softkey is available and then press the Feat softkey.
2. Dial .
NOTE: This features is known as a “Recall” in European systems.
PROGRAMMING SOFTKEYS
Depending on how your system is programmed, some of your softkeys (Pgm 1-5)
may be “user-programmable.” If so, you can program them as feature, Direct Station
Selection/Busy Lamp Field (DSS/BLF), or Station Speed-Dial (see page 67) buttons.
To view how your programmable softkeys are programmed:
1. While in idle mode, press to bring up the two-line display.
2. Press until the programm able softkeys (Pgm 1-5) are available.
3. Dial .
4. Press the desired programmable softkey. The feature programmed for the soft-
key is displayed.
NOTE: If the display shows UNDEFINED KEY, the softkey is programmable, but
has not yet been programmed.
5. Press to exit.
To return all programmable softkeys to their original default values:
1. While in idle mode, press to bring up the two-line display.
2. Dial .

Feature Buttons

A softkey programmed as a feature button provides a way to quickly access the associ-
ated feature.
To program a softkey as a feature button:
1. While in idle mode, press to bring up the two-line display.
2. Press until the programm able softkeys (Pgm 1-5) are available.
3. Dial .
4. Press the softkey y ou want to program.
5. Dial the feature code you want to store under that button. (Refer to page110 for
default feature codes.)
FCN
7
FCN
3 3 0
MENU
FCN
3 9 6
#
MENU
3 9 5
MENU
FCN
3 9 7