SpectraLink BPX100 manual Feature activation

SpectraLink Corporation		NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Feature activation	1.	Press the Start Call button followed by the MENU key. The
		Pre-dial labels and corresponding shortcut codes are
		displayed.
	2.	Navigate the list using the side Up and Down buttons. The
		list is circular. Alternatively, the MENU button may be
		pressed repeatedly to display the next set of four options.
	3.	Select the feature by pressing the OK soft key. Alternatively,
		press the Select button or dial the shortcut, if available. The
		handset then sends the programmed codes to the PBX.
	4.	The Exit soft key or End Call key can be used to terminate
		prior to making a feature selection.
	5.	There is a ten second timeout which will return the handset
		to the previous state if no additional keys are pressed while
		in either Pre-dial menu or pre-dial mode.
	6.	The PBX could automatically release the call in some cases.
		In this case the handset returns to the Standby mode.
	7.	There is a ten second timeout which will return the handset
		to the previous state if no additional keys are pressed while
		in the Post-dial menu.

Part Number: 72-1004-01-H.doc Page 41