120V AC Outlet Recovery Power Adapter (provided)
The 120 VOLT AC OUTLET RECOVERY POWER ADAPTER is an featured TeleMatrix product. It provides both the telephone lines and the power source in one cable (6P6C line cord) and is designed to recover the use of the power outlet.
Connector Configuration
The 120V Outlet Recovery Power Adapter has two (2) modular jacks. One jack is labeled “LINE” and the other jack is labeled “PHONE”. These jacks allow for a fully modular instal- lation.
Power Adapter “LINE” Connection
The power adapter “LINE” connection is used to connect the telephone line from the wall jack to the power adapter. Using one of the 15 foot modular telephone line cord, connect one end of the cord to the RJ14 telephone jack on the wall or base board. The remaining end of the cord plugs into the “LINE” side of the power adapter.
L1+L2 L2
EN
_
L
Power Adapter “PHONE” Connection
The power adapter “PHONE” connection is used to provide both the telephone lines and the power source to the telephone. Using one of the 15 foot modular telephone line cord, plug one end of the line cord into the back of the telephone. Plug the remaining end to the power adapter jack labeled “PHONE”.
OUT
E
N
O
H
P
ORDER SEPERATELY
16
