Call Record Editing Prior to Dialing
To Add Characters to the Displayed Number
1.Press the “↑” or “↓” key to activate the display for scrolling.
2.Scroll the “↑” or “↓” key to find the num- ber to be dialed.
3.Activate the editing feature by pressing any number on the keypad. (Note that the key pressed will be displayed on the LCD).
4.Press the keypad number you require and it will appear on the LCD prior to the number on the display
5.Lift handset or activate the “SPEAKER” key.
6.Press the “DIAL” key to dial the number automatically. When pressing the “DIAL” key, the “SPEAKER” will acti- vate.
Note: The number can only be inserted prior to the displayed digits. See Delete Characters for improper inserted characters.
To Delete Characters from the Displayed Number
1.Press the “↑” or “↓” key to activate the display for scrolling.
2.Scroll the “↑” or “↓” key to find the number to be dialed.
3.Activate the editing feature by pressing any number on the keypad.
4.Press the “DELETE” key to delete in- dividual characters.
5.Lift handset or activate the “SPEAKER” key.
6.Press the “DIAL” key to dial the num-
ber automatically. When pressing the “DIAL” key, the “SPEAKER” will activate.
Note: When deleting characters from a caller’s identity, the Call Log will not be changed.
12/01 PM12:00
037196388821
TELEMATRIX
PhBook | Delete | Dial |
or
PLUS
1 2 3
4 5 6
7 8 9
* 0 #
EDIT NUMBER WITH KEYPAD
THEN PRESS DIAL | ||
PhBook | Delete | Dial |
!
NOTE: The area code initially entered into the AREA CODE programming set up will recognize your local area code and eliminate this number when dialing out.
56
