Manual Timer Control

MT and RT Control Suffixes

1.Set the HEAT/DRYING timer for the number of minutes (from 0-60) desired.

0

6010

Installation/Operation Supplement

5.Press the PUSH TO START button in, and hold it in for approximately three (3) seconds. This starts the tumbler cycle.

PUSH

TO

START

TMB2146N

50

40

20HEAT

30

TMB2142N

Figure 12

IMPORTANT: If the loading door or lint panel door is opened during the cycle, the heating system

Figure 8

2.Set the COOL DOWN/COOLING timer for the number of minutes (from 0-15) desired.

0

15

5

COOL

will shut off and the motor will stop. To restart the cycle, both doors must be closed and the PUSH TO START button must be pressed in.

6.When the cycle is complete, open door and remove the laundry.

10

DOWN

TMB2143N

Figure 9

3.Set the TEMPERATURE selector at HIGH, LOW or anywhere between these settings.

TEMPERATURE

HIGHLOW

TMB2144N

Figure 10

4.Select reversing or nonreversing cylinder rotation setting, if applicable.

TMB2145N

Figure 11

M414884 (EN)

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT

23