Speed Queen W001C Tools, Step 1: Remove the Shipping Brace and Shipping Plug, Before You Start, Installing the Washer, NOTE: Do not tilt washer to front or sides when moving

Installation

Before You Start

Tools

For most installations, the basic tools you will need are:

1 2 3

4

D074I

1Wrench

2Screwdriver

3Pliers

4Level

Figure 1

Installing the Washer

NOTE: If washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up.

NOTE: Install dryer before washer. This allows for attaching exhaust duct.

Step 1: Remove the Shipping Brace and Shipping Plug

Remove the shipping brace from under the lid. The plastic shipping plug will be released from the base of the washer when removing the cardboard base from the washer.

NOTE: Do not tilt washer to front or sides when moving.

Save brace and plug and reinstall whenever washer is moved.

1

2

TLW521N

1Shipping Brace

2Shipping Plug

Figure 2

10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 39971