
DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT.
WARNING
To reduce the risk of electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source.
W031
240 Volt/60 Hertz
The washer is designed to be operated on a separate polarized
10 ampere fuse, equivalent fusetron or circuit breaker.
DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT WHEN THE WASHER IS OPERATING.
Earthing (Grounding) Instructions
The washer must be earthed (grounded). In the event of malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least
Installation
Water Supply Requirements
WARNING
Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period and before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable. Do not smoke or use an open flame during this time.
W029
NOTE: Water supply faucets must fit standard
19.1mm (3/4 inch) female garden hose couplings.
DO NOT USE SLIP-ON OR CLAMP-ON CONNECTIONS.
1
resistance for electric current. The washer is equipped with a cord having an
WARNING
Improper connection of the equipment- earthing conductor can result in a risk of electric shock. Check with a qualified
4
2
C
H
3
W516I
electrician or service person if you are in doubt as to whether the washer is properly earthed.
W032
1Water Supply Faucets
2Cold Water Connection
3Hot Water Connection
4Fill Hoses
Figure 19
39971 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 17 |