To Wash Clothes

IMPORTANT: Before using your new washer, make sure the washer cord is plugged into an electrical outlet that has the proper grounding and polarity. Make sure the washer hoses are connected to the hot and cold water faucets, and that the faucets are turned on. Be sure the drain hose is not kinked and is inserted into a drain. Refer to the INSTALLATION section for details of proper washer installation.

IMPORTANT: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation.

1.Sort items into separate loads. Pretreat stains and heavily soiled areas.

D305I

Figure 24

2. Measure and add detergent to the washtub.

W395I

Figure 25

3. Add clothes loosely into the washtub.

W281I

Figure 26

Operation

4.Close the lid. The washer will not agitate or spin with the lid open.

W318I

Figure 27

5. Set WASH/RINSE temperatures.

NOTE: The washer will provide a cold rinse in all TEMPERATURE settings. Cold rinses will save you money and energy and will help reduce wrinkling in permanent press and synthetics.

Do not use a warm rinse with permanent press or other synthetic fabrics. A warm rinse can cause wrinkling in some garments.

When using the HANDWASH/DELICATE cycle, a WARM rinse is not available. If the WASH/RINSE selection is set on WARM/WARM, the washer will still give a COLD rinse. This is to assure proper care of delicate items.

NOTE: The Energy Saver settings, marked with a dot (•) or an asterisk (*), show which temperature settings will use the least energy.

6.Set LOAD SIZE (WATER LEVEL) control. Use RESET if agitation has started and more water is needed.

IMPORTANT: Holding the LOAD SIZE (WATER LEVEL) control in the RESET position can cause flooding of the washer.

7.Select the cycle according to the type of fabric being washed. Push the timer knob in and turn clockwise to the desired cycle and wash time.

8.Pull the timer knob out to start the water fill. Agitation will begin when the water reaches the level you selected.

The washer will stop (pause) shortly before the wash and rinse spins. Do not turn the timer through these pauses. They are part of the cycle.

39971

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

21