Use the following table to choose the setting appropriate for your needs.
ADMIN
Setting Restrictions
1None. (Allows unrestricted calling.)
2Prohibits dialing 0 or 1 as the first digit.
3Prohibits dialing 0 or 1 as the first or second digit.
4Prohibits dialing outside calls. (Allows making intercom calls only.)
Step 3 — Mount the ConnecT/R (optional).
The ConnecT/R is designed to be placed on your desk or mounted on any vertical surface. Do not place it on the floor. Hardware has been included to mount the ConnecT/R on the wall: two plastic
1.Select an appropriate location. The ConnecT/R can be no more than six feet
from its power supply (an AC outlet that isn't controlled by a wall switch) and no more than six feet from the devices attached to it. The bottom of the ConnecT/R should be at least two feet from the floor.
2.Position the ConnecT/R so the side with the jacks and settings is down or to the side, but not up.
3.Remove the backing from the plastic tabs.
4.Gently position a tab by aligning the end of the adhesive with the outside edge of the ConnecT/R and the side of the tab against the inside of one of the feet. Repeat for the second tab.
Adhesive Area
Plastic Tabs |
|
Feet |
|
Power Cord | Power Cord |
down | to the side |
|
9
