Appendix A — Wiring Requirements
Note the following cabling requirements before connecting the equipment. If these limits (which are the same ones that apply to our current SPIRIT System) are exceeded, the ConnecT/R may not work properly.
●The total wiring length from the controller to the SPIRIT Telephone cannot exceed a total of 1000 feet of
●The total wire length from the controller to the telephone device cannot exceed a total of 1000 feet of
●If the ConnecT/R is installed outside the building where the controller is located, or away from the building where the attached SPIRIT Telephone is located (using exposed wiring),
Contact your AT&T representative for additional information.
●If the telephone device will be in a building other than where the ConnecT/R is located, a Block Protector must be installed by a qualified technician (one Block Protector for each "remote" telephone device). Order an AT&T Model 4C1S (comcode 104386545). In addition, you will need a Building Entrance Protector, which can house up to six 4C1S Block Protectors. Order Model
25
