XE Series Elliptical
23
enter a name use the Up and/or the Down key to change the first letter then press Enter to
save the first letter and continue to the next letter. When you have finished entering the
name press the Stop key to save the name and continue to th e next step.
3. The message window will ask you to enter yourAge. You may enter your Age, using the Up
and Down keys or the numeric key pad, then press the Enter key to accept the new number
and proceed on to the next screen.
4. You are now asked to enter yourWeight. You may adjust the Weight number using the Up
and Down keys or the numeric key pad, then press enter to continue.
5. Next is Time. You may adjust the Time and press enter to continue.
6. Now you are asked to adjust theMax Level. This is the peak exertion level you will
experience during the program. The factory setting is level seven. Adjust the level and then
press enter.
7. Now the first column will be blinking and you are asked to adjust the level for the first
segment of the workout. When you finish adjusting the first segment, or if you dont want to
change, then press enter to continue to the next s egment.
8. The next segment will show the same level as the previously adjusted segment. Repeat the
same process as the last segment then pres s enter. Continue this process until all twenty
segments have been set.
9. The message window will then tell you to press enter to save the program. After saving the
program the message window says New program saved then will give you the option to
Start or modify the program. Pressing Stop will exit to the start up screen.
10. If you want to increase or decrease the work load at any time during the program press the
Up or Down key. This will only affect the workload for the present position in the profile.
When the profile changes to the next column it will return to the preset work level.
11. During the User 1 or User 2 program you will be able to scroll through the data in the
message window by pressing the adjacent Display key, switch between the profile display
and a quarter mile track by pressing the Display key adjacent to the matrix, use the heart
rate monitoring features and can switch to heart rate Auto-Pilot mode. See Heart Rate
section for details of this feature).