XT8 / XT10
14
XT10 Console
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood. Ensure that the safety key is
installed, as the treadmill will not operate without it.
When the power is turned on, all the lights on the display will light for a short time. Then the
Time and Distance windows will display Odometer readings for a short time. The Time
window will show how many hours the treadmill has been in use and the Distance window will
show how many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has
gone. Then a message will scroll across the dot matrix showing the current software version.
The treadmill will then enter idle mode, which is the starting point for operation.
Quick-Start Operation:
STEP 1: Press and release the Start key to wake display up (if not already on).
Note: Installing the tether key will also wake up the console.
STEP 2: Press and release the Start key to begin belt movement, a t .5 mph (1.0kmph), then
Adjust to the desired speed using the Fast / Slow keys (c ons o le or hand rail). You may also
use the rapid speed keys 2 through 12 to adjust the speed.