Belt/deck lubrication procedure:

Do not lubricate with other than Spirit approved lubricant. Your treadmill comes with one tube of lubricant and extra tubes can be ordered directly from Spirit. There are commercially available lube kits, but the only one currently approved by Spirit is Lube-N-Walk. These kits come with an application wand that makes applying the lubrication easier. The kits can be purchased from Spirit or directly from Lube-N-Walk here: http://www.jadfitness.com/

Keeping the deck lubricated at the recommended intervals ensures the longest life possible for your treadmill. If the lubricant dries out, the friction between the belt and deck rises and places undue stress on the drive motor, drive belt and electronic motor control board, which could result in catastrophic failure of these expensive components. Failure to lubricate the deck at regular intervals may void the warranty.

The deck comes pre-lubricated and subsequent lubrication should be performed every 180 hours of use, or every three months, whichever comes first. The console has a built in lubrication reminder indicator that lights every 180 hours of use. To lubricate the deck with the tube of lubricant supplied it will be necessary to loosen the walking belt. Using the 6 mm allen wrench supplied, loosen the two rear roller adjustment bolts -- located in the rear end caps ￿ enough to get your hand under the belt (5 ￿10 turns). Make sure to loosen both bolts the same amount of turns and also remember how many turns, because when finished you will need to tighten the bolts back to the point they were before.

Once the belt is loose, wipe the deck with a clean lint free cloth to remove any dirt. Apply the whole tube of lubricant onto the deck surface about 18 inches from the motor cover. Squeeze out the contents of the tube across the deck (parallel to the motor cover) in about a one foot line, like toothpaste on a toothbrush. The one foot line should be in the middle of the deck at approximately equal distance from both side edges of the belt. You want the lubricant to be applied about the spot that your feet would hit the belt as you are walking. This should be about 18 inches from the motor cover, but you may want to walk on the treadmill before loosening the belt to note where your feet land on the belt. If you mostly run on the treadmill the spot where your feet land may be different from walking.

Once the lubricant is applied, tighten the rear roller bolts the same amount of turns as when you loosened them. Run the treadmill at about 6 mph without walking on it for about a minute or two to make sure the belt stays in the middle of the deck. If the belt tracks to one side then follow the belt tracking instructions to remedy. Now the deck is lubricated and you should walk, not run, on the treadmill immediately for at least 5 minutes to ensure the lubricant is evenly distributed. If you purchase a Lube-N-Walk kit, follow the instructions that come with it to apply the lubrication.

24

XT8 / XT10

Page 24 Page 26
Page 25
Image 25
Spirit XT101, XT8 owner manual Belt/deck lubrication procedure
Page 24 Page 26

XT8, XT101 specifications

The Spirit XT101 and XT8 are two premium models in the line of elliptical trainers designed to offer versatile and effective workout experiences at home. Especially popular among fitness enthusiasts, both machines are designed with user-friendly features, optimized technology, and an engaging training experience.

The Spirit XT101 is known for its solid construction and comprehensive functionality. This elliptical trainer features a 20-inch adjustable stride length, accommodating users of varying heights and fitness levels. The XT101 is equipped with a computer console that displays essential metrics, including time, distance, calories burned, resistance level, and heart rate. This allows users to easily track their progress and stay motivated throughout their workouts.

One of the standout features of the XT101 is its 20 levels of resistance. This wide range ensures that both beginners and advanced users can customize their workouts according to their fitness goals. The quiet, frictionless magnetic resistance system not only enhances the workout experience but also reduces wear and tear on the equipment, promoting long-lasting use.

In addition to the XT101, the Spirit XT8 brings a higher level of sophistication and functionality. Also boasting a 20-inch adjustable stride length, the XT8 features a robust LCD console that provides additional workout programs, including various HEART RATE control programs designed to optimize calorie burning and cardiovascular benefits. The console allows users to enhance their workout routines with challenges and guided programming.

The XT8 also showcases a higher resistance capability with 20 levels, but sets itself apart with its commercial-grade construction, making it ideal for both home gyms and fitness centers. Its stylish design includes a heavy-duty flywheel that contributes to a smooth and stable workout experience, crucial for users seeking intense training.

Both models prioritize user comfort with oversized pedals that offer ample space and a cushioned feel, promoting natural leg movement and reducing discomfort during prolonged workouts. Furthermore, the durable frames are built to support heavier weights, making both the XT101 and XT8 suitable for a wider range of users.

In summary, the Spirit XT101 and XT8 are exceptional elliptical trainers loaded with advanced features and technology designed for users aiming to achieve their fitness goals. With adjustable stride lengths, an extensive range of resistance levels, and reliable workout metrics, these machines hold the potential to elevate your fitness routine and ensure engaging, effective training sessions. Whether you're a beginner or a seasoned athlete, both models cater to a variety of fitness needs, emphasizing comfort, durability, and performance.
Top Page Image Contents