Spirit Z100, Z700, Z500, Z300 Important Operation Instructions, Safety Tether Cord, To Use

Models: Z500

1 23
Download 23 pages 35.9 Kb
Page 6
Image 6
Important Operation Instructions

Important Operation Instructions

NEVER operate this treadmill without reading and completely understanding the

results of any operational change you request from the computer.

Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.

NEVER use your treadmill during an electrical storm. Surges may occur in your

household power supply that could damage treadmill components.

Use caution while participating in other activities while walking on your treadmill; such as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.

NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start at a very low speed and it is unnecessary to straddle the belt during start up.

Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.

Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).

Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure contact your Spirit dealer.

Safety Tether Cord

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1.Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2.Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not come off. Be

5

Z8

Page 6
Image 6
Spirit Z100, Z700, Z500, Z300 owner manual Important Operation Instructions, Safety Tether Cord, To Use