Sprint Nextel 2012J operating instructions Memory Dialing, To Change a Stored Number

MEMORY DIALING

You can quickly dial the numbers you stored into the 3 one- touch speed dial buttons or 10 two-touch speed dial memories. Storing Phone Number into Memory

1.Press the STORE button. Pro (short for programming) appears on the display.

2.Dial the phone number you want to store. You can store up to 22

digits, including a TONE ( ) and a PAUSE (REDIAL), each of which is counted as one digit.

3.For one-touch dialing: For two-touch dialing:

Press one of the 3 one- Press the MEMO button, and the touch speed dial but- press one of the dialing keys (0 to 9)

tons (M1 to M3). to store a phone number in.

The stored number and the location will show in the display.

4.Press the STORE button, or wait 3 seconds to resume normal display.

5.Repeat steps 1-4 to store numbers into other memory locations.

NOTE: When the batteries are dead or removed for more than 5 min- utes, the stored numbers may be erased.

TIP: If you entered a wrong number, you may press the STORE button, then start from the beginning.

TO STORE A NUMBER TO BE DIALED VIA PRIVATE BRANCH EXCHANGE (PBX)

Before entering a phone number in Step 2 in Storing phone number into memory, do as follows:

1.Enter the outside line access digit (e.g., 9).

2.Press the REDIAL button (for a pause).

TO CHANGE A STORED NUMBER

Just store a new number, as described above, the old one will be erased automatically.

7