Note: Only the number will be stored, not the name.
Deleting the Data from the Callers List
TO DELETE THE CALL DISPLAY MEMORY ONE BY ONE
1.Display the entry you want to delete.
2.Press the DELETE button twice quickly, the display shows the next or previous call, and the data is deleted.
TO DELETE ALL CALLERS LIST ENTRIES
1.Make sure that all NEW calls have been reviewed (NEW CALL INDI- CATOR (at the back of the handset) does not flash).
2.Press the UP or DOWN button to display any call, make sure the display does not show "END OF LIST".
3.Press and hold DELETE button down for 6 seconds. Display changes to "NO CALLS", all Callers List Entries are deleted.
NOTE: You cannot delete all the Callers List Entries when there are any new calls remaining (not viewed yet), or when "END OF LIST" is shown on the display.
Using Message Waiting/Mailbox
To use the Message Waiting feature, you must subscribe to this service if available from your local telephone company. This phone will only respond to FSK type of message delivery.
1.If the message is sent by the telephone company which is pre- ceded by a ring, the MESSAGE WAITING symbol will appear on the display, and the NEW CALL INDICATOR will flash after 20 seconds.
2.After you retrieve your message(s), the telephone company will send a clear signal (by a ring) to your phone. The symbol will turn off until a new message is received. The NEW CALL INDI- CATOR will stop flashing. Sometimes the telephone company will not send a message clear signal to your phone, then you will have to clear the message waiting symbol manually by holding the DELETE button, then pressing the UP button.
11
