Section 3A: Your Card: The Basics (Windows) 43
Starting Sprint Connection Manager Automatically
To set SprintConnection Manager to start automatically whenever Windows starts:
䊳From the General option in the “Settings” window (page75), select
Launchwhen Windows starts.
Sprint Connection Manager Window
If SprintLocation Services and the GPS Receiver window are not supported or not
enabled (page 81), then only the Mobile Broadband window is displayed:
If SprintLocation Services and the GPS Receiver window are supported and
enabled, then the GPS Receiver window is additionally shown below the Mobile
Broadband window:
Note: Changes to this setting apply only after you restart Windows.
Tip: You can also set the connection to launch automatically whenever
available. (See “GO automatically when ready” on page 78.) These settings
provide an “always-on” connection, as long as you have network coverage.