•Close the battery cover. Rotate the battery cover screws in clockwise direction. You can use the screwdriver provided to tighten the screws. Ensure not to over tighten the screws.
2.Charge your battery.
•Plug the charger into a power outlet.
•The charger port is located on the left side of the phone. To access the charger port, lift the cover with the USB sign. Insert the 3.5mm jack/connector of the USB cable into the port and insert the other end of the USB cable into the charger.
•Fully charge the battery. For details, see Charging the Battery.
Note: Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible.
3. Press and hold the Power ON/OFF key for two seconds to power on the phone.
•If your phone is activated, it will search for Sprint service and enter standby mode.
•If your phone is not yet activated, see Activate Your Phone for more information.
Activate Your Phone
Depending on your account or how and where you purchased your phone, it may be ready to use or you may need to activate it on your Sprint account.
nIf you purchased your phone at a Sprint Store, it is probably activated and ready to use.
nIf you received your phone in the mail and it is for a new Sprint account or a new line of service, it is designed to activate automatically.
•When you turn the phone on for the first time, a Contacting network screen is displayed. Follow the onscreen instructions to continue.
Get Started | 2 |
