Remote Operation
n Remote Operation
While you are away from your home or office, you can use a
²set the TAD to answer calls
²listen to your messages
²record a new announcement
²record a memo
²delete messages
Note: You cannot remotely operate the TAD from another phone on the same line as your
You can also use your
USING THE TOLL-SAVER
If the ring select switch is set to SA
USING REMOTE COMMANDS
Whether you are using the handset or calling from a
From a remote touch-tone phone:
Dial your phone number. When the TAD answers, enter your remote access code. The TAD announces the number of messages and beeps twice to confirm that you entered the correct code.
Notes:
²If you do not enter each digit of the remote access code within 8 seconds, the TAD hangs up.
²If the TAD is not set to answer calls or the memory is full, it will answer after 10 rings.
From the handset:
Press ANS SYS. The ANS SYS indicator lights. The TAD announces the number of messages and beeps twice.
After connecting with the TAD, enter a remote command (see “Remote Commands” on Page 21), or press 5 to hear voice prompts, or wait until the TAD begins playing all messages (after about 4 seconds).
When you finish, simply hang up (remote phone) or press ANS SYS
20