Sprint Nextel UG_9a_070709 manual Data Roam Guard, To place roaming calls with Call Guard on

2.Press ON or OFF (left softkey).

Note: Call Guard is turned on by default on your phone.

Voice dialing and speed dialing are not available when you are roaming with Call Guard enabled.

To place roaming calls with Call Guard on:

1.From standby mode, dial 1 + area code + the seven-digit number and press .

2.press CONTINUE (left softkey) or .

To answer incoming roaming calls with Call Guard on:

1.Press . (A message will be displayed notifying you that roaming charges will apply.)

2.press CONTINUE (left softkey) or .

Note: If the Call Guard feature is set to On, you need to take extra steps to make and receive roaming calls.

Data Roam Guard

Depending on service availability and roaming agreements, your phone may be able to access data services while roaming on certain digital systems. You can set your phone to alert you when you are roaming

off the Nationwide Sprint Network and try to use data services such as messaging.

Note: Data Roam Guard is turned on by default on your phone.

To set your Data Roam Guard notification:

1.Press > Settings > Others > Roaming > Data Roam Guard.

2.Press ON (left softkey) to set your phone’s Data Roam Guard feature on. You will see a prompt and will be required to respond anytime you access data services while roaming.

– or –

Press OFF (left softkey) to turn your phone’s Data Roam Guard feature off. You will not be notified of your roaming status when accessing data services.

To use data services when Data Roam Guard is active:

When a pop-up notification appears informing you that data roam charges may apply, press ROAM (left softkey) to connect.

Sprint Basics

3A. Sprint Service: The Basics 99