Sprint Nextel UG_9a_070709 Selecting a Ringer Type for an Entry Assigning a Picture to an Entry

Selecting a Ringer Type for an Entry Assigning a Picture to an Entry

Assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer Types” on page 30.)

1.From standby mode, press CONTACTS (right soft key), highlight a contact and press OPTIONS (right softkey) > Edit Contact.

2.Highlight the current ring type and press to display the Ringer Type menu.

3.Select a ringer location, such as Default Ringer, Downloaded Ringers, Other Ringers, VoiceMemo, My Audio, or No Ringer.

4.Scroll through available ringers. (If your volume settings allow, you can listen to a sample the ringer by highlighting it.)

5.Highlight a ringer and press .

6.Press DONE (left softkey) to save the new ringer type.

Assign a picture to display each time a certain contact calls you.

1.From standby mode, press CONTACTS (right soft key), highlight a contact and press OPTIONS (right softkey) > Edit Contact.

2.Press the directional key up to highlight the current

image and press to display the Picture ID menu.

3.Select an option, such as No Image, Take New Picture, MyPhotos, DownloadedImages, or Assigned Media.

4.Highlight a picture and press ASSIGN (left softkey) to assign it.

If you selected Take New Picture, the camera will launch so you can take a new picture. (See “2H. Camera” on page 76 for details.)

If you selected My Photos, you may need to select In Phone or Memory Card to find the picture.

5.Press DONE (left softkey) to save the assigned picture.

Contacts

2D. Contacts 55