SRS Labs manual SR530 Specification Summary, General, Signal Channel, Reference Channel

SR530 Specification Summary

General
Power	100, 120, 220, 240 VAC (50/60 Hz); 35 Watts Max
Mechanical	17" x 17" x 5.25" (Rack Mount Included) 16 lbs.
Warranty	Two years parts and labor.
Signal Channel
Inputs	Voltage:		Single-ended or True Differential
	Current:		106 Volts/Amp
Impedance	Voltage:		100 MΩ + 25 pF, ac coupled
	Current:		1 kΩ to virtual ground
Full Scale Sensitivity	Voltage:		100 nV (10 nV on expand) to 500 mV
	Current:		100 fA to 0.5 µ A
Maximum Inputs	Voltage:		100 VDC, 10 VAC damage threshold
			2 VAC peak-to-peak saturation
	Current:		10 mA damage threshold
			1 µ A ac peak-to-peak saturation
Noise	Voltage:		7 nV/√ Hz at 1 kHz
	Current:		0.13 pA/√ Hz at 1 kHz
Common Mode	Range:		1 Volt peak; Rejection: 100 dB dc to 1KHz
			Above 1KHz the CMRR degrades by 6 dB/Octave
Gain Accuracy	1% (2 Hz to 100KHz)
Gain Stability	200 ppm/°C
Signal Filters	60 Hz notch, -50 dB (Q=10, adjustable from 45 to 65 Hz)
	120 Hz notch, -50 dB (Q=10, adjustable from 100 to 130 Hz))
	Tracking bandpass set to within 1% of ref freq (Q=5)
Dynamic Reserve	20 dB	LOW		(1 µ V to 500 mV sensitivity)
	40 dB	NORM		(100 nV to 50 mV sensitivity)
	60 dB	HIGH		(100 nV to 5 mV sensitivity)
	Bandpass filter adds 20 dB to dynamic reserve
	Line Notch filters increase dynamic reserve to 100 dB
Reference Channel
Frequency	0.5 Hz to 100 kHz
Input Impedance	1 MΩ , ac coupled
Trigger	SINE:		100 mV minimum, 1Vrms nominal
	PULSE:		±1 Volt, 1 µ sec minimum width
Mode	Fundamental (f) or 2nd Harmonic (2f)

3