OPERATIONAL INSTRUCTIONS
USING THE ELECTRONIC METER
POWER ON: Pedal movement or press any button.
POWER OFF: Automatic shut off after three minutes of inactivity.
FUNCTION BUTTONS :
MODE : Press and release to select the function to display on the screen.
RESET : Press the button and hold it down for two seconds to reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans SPEED, DISTANCE, TIME, and CALORIE in sequence with a change every five seconds. Press and release the MODE button until the arrow on the display points to "SCAN".
SPEED: Displays the current speed from zero to 999.9 miles per hour. DISTANCE: Displays distance from the time the meter is turned on to 999.9 miles.
TIME: Displays the time from one second up to 99:59 minutes.
CALORIE: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison between workouts on this unit.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will be kept. Push the RESET button to reset the functions to zero.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the meter.
2. The meter operates with two AA batteries, included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with another type of battery.
3. Rechargeable batteries are not recommended.
10
