OPERATIONAL INSTRUCTIONS
SEAT ADJUSTMENT
Proper seat adjustment is important.
1. Turn the ADJUSTMENT KNOB(41) to loosen, then pull the ADJUSTMENT KNOB(41) to release the pin. Slide the SEAT FRAME(5) until the SEAT(43) is at the proper height. Release the ADJUSTMENT KNOB(41) making sure the pin catches in one of the holes of the SEAT FRAME(5) and tighten the ADJUSTMENT KNOB(41).
2. Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from the pedals if you have to completely straighten your knees at the bottom of the pedal stroke. Refer to the illustration.
CAUTION:
1. Do not attempt to adjust the seat while you are on the
INTONE Folding Recumbent Bike.
2.Always tighten the ADJUSTMENT KNOB(41) after adjusting the seat to a new position.
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(29) clockwise.
To decrease the load, turn the TENSION KNOB(29) counterclockwise.
MAINTENANCE
The safety and integrity designed into the INTONE
Folding Recumbent Bike can only be maintained when the INTONE Folding Recumbent Bike is regularly examined for damage and wear. Special attention should be given to the following:
1.Adjust the TENSION KNOB(29) and verify that the Magnetic System provides tension. The Magnetic System should provide many years of use.
2.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3.Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten loose nuts and bolts.
4.Worn or damaged components shall be replaced immediately or the INTONE
Folding Recumbent Bike removed from service until repair is made.
5.Only Stamina Products supplied components shall be used to maintain/repair the INTONE
Folding
Recumbent Bike.
6. Keep your INTONE Folding Recumbent Bike clean by wiping with an absorbent cloth after use.
11
