ASSEMBLY INSTRUCTIONS
Peg |
STEP 4
Attach the SEAT(43) to the SEAT FRAME(5) with HEX BOLTS(M8x1.25x20mm)(64) and WASHERS(M8) (75). Pull the ADJUSTMENT KNOB(41), then insert the SEAT FRAME(5) into the MAIN FRAME(1) and secure with the ADJUSTMENT KNOB(41).
NOTE: 1. It may be necessary to unscrew the ADJUSTMENT KNOB(41) slightly to insert the SEAT FRAME(5).
2.Make sure that the pin on the ADJUSTMENT KNOB(41) is inserted into one of the holes in the
SEAT FRAME(5).
3.The ADJUSTMENT KNOB(41) should be screwed in tight to make the SEAT FRAME(5) fit securely in the MAIN FRAME(1).
STEP 5
Attach the BACK SUPPORT(6) to the SEAT FRAME(5) by sliding the slots in the end of the BACK SUPPORT(6) onto the pegs on the SEAT FRAME(5) and securing with CARRIAGE BOLT(M8x1.25x85mm) (57), SPACER(80) ,WASHER(M8)(75), and the LOCKING KNOB(45).
STEP 6
Attach the HANDRAIL(7) to the SEAT FRAME(5) with HEX BOLTS(M8x1.25x40mm)(65) and ARC
WASHERS(M8)(74).
7
