OPERATIONAL INSTRUCTIONS
11
Attach the PUSH-THRU BAR(26) to one of the adjustment holes in the UPRIGHTS(7, 9) with two
LOCKING PINS(30).
Attach the SECURING STRAP(32) to the EYEBOLT(23) on the top of the TOP BEAM(22). For some
exercises, the PUSH-THRU BAR(26) should be up and secured in position with the SECURING STRAP
(32).
The PUSH-THRU BAR(26) can be used as a footbar for some exercise s. Attach the PUSH-THRU BAR(26)
to the lowest adjustment holes in the UPRIGHTS(7, 9) with two LOCKING PINS(30). Lock the PUSH-
THRU BAR(26) and UPRIGHTS(7, 9) together with two LOCKING PINS(30).
NOTE: a.
b.
c.
d.
There are three adjustment holes in the LEFT and RIGHT UPRIGHTS(7, 9) that allow you to
attach the PUSH-THRU BAR(26) at one of three different heights.
Refer to the inset drawing. Push down the button on the "T" end of the LOCKING PIN(30) to
release the steel ball on the other end of the pin. Then you can insert the LOCKING PIN(30) into
the adjustment hole. Push the button to remove the pin.
Always make sure SAFETY STRAP(37) is connected when the PUSH-THRU BAR(26) is in use.
Always use SECURING STRAP(32) to keep the PUSH-THRU BAR(26) in a secure position
when not in use.
Button
SET-UP FOR THE PUSH-THRU BAR
1.
2.
3.
This bar can be used
as a footbar.