Stamina Products 20-1200

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all

packing materials from your area and place them ba ck into the box. Do not dispose of the pa cking materials

until assembly is completed. Read each step carefully before beginning. If you are missing a part please

call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com

STEP 1: Note the correct position of the holes and loops on the LEFT UPRIGHT(7) and RIGHT UPRIGHT(9)

in the illustration above. The holes face away from the BASE CUSHION(4) and the loops face to the outside.

Attach the LEFT UPRIGHT(7) and the RIGHT UPRIGHT(9) to the BASE FRAME(3) by inserting the BUTTON

HEAD BOLTS(M8x1.25x70mm)(50) and ARC WASHERS(M8)(61) from top, and secure with WASHERS(M8)

(59) and NYLOCK NUTS(M8x1.25)(56) from bottom. Do not tighten the bolts until STEP 5.

STEP 2: Note the correct position of the loops on the LEFT SLIDER(8) and RIGHT SLIDER(10) in the

illustration above. The loops face to the outside.

Pull the SPRING PIN(12) then slide the RIGHT SLIDER(10) onto the RIGHT UPRIGHT(9). Release the

SPRING PIN(12) so it catches in one of the adjustment holes and locks the RIGHT SLIDER(10) in place.

Repeat with the LEFT SLIDER(8) and LEFT UPRIGHT(7). Position the LEFT and RIGHT SLIDERS(8,10)

so they are the same distance from the top of the LEFT and RIGHT UPRIGHTS(7,9).

Loop