ASSEMBLY INSTRUCTIONS
8
STEP 3
Attach the WOODEN BARRE(13) to the LEFT and RIGHT SLIDERS(8, 10) with BUTTON HEAD BOLTS
(M8x1.25x55mm)(49), LOCK WASHERS(M8)(62), and ACORN NUTS(M8x1.25)(55). Do not tighten the
bolts until STEP 5.
STEP 4
Note the correct position of the holes and EYEBOLTS(23) on the TOP BEAM(22) in the illustration above.
Insert the TOP BEAM(22) into the LEFT and RIGHT UPRIGHTS(7, 9) and secure with the SECURING
KNOBS(25).
STEP 5
Tighten the BUTTON HEAD BOLTS(M8x1.25x60mm)(49) to secure the WOODEN BARRE(13).
Tighten the BUTTON HEAD BOLTS(M8x1.25x70mm)(50) to secure the LEFT and RIGHT UPRIGHT(7,9).
STEP 6
Attach the OUTER COVER(15) and INNER COVER(14) to the RIGHT UPRIGHT(9) with ROUND HEAD
SCREWS(M4x20mm)(45). Repeat on other side.