Stamina Products 20-1200 TO USE THE ACCESSORIES: (continued)

OPERATIONAL INSTRUCTIONS

Refer to the illustration. The SAFETY STRAP(37) must be used

as follows:

When using the PUSH-THRU BAR(26) with the PUSH-THRU

SPRING(34) attached from below for bottom load exercises,

attach the SAFETY STRAP(37) to another side of the tower

from the spring. Connect one end of the strap to one of the

EYEBOLTS(23) on the TOP BEAM(22) with the LINK(31).

Connect the other end of the strap to the loop on the PUSH-

THRU BAR(26) with the LINK(31).

TO USE THE ACCESSORIES: (continued)

Attach ARM SPRINGS(35) to eyebolts at desired height with the LINKS(31). Attach the other ends of the

springs to the HAND STRAPS(21) with the DOUBLE ENDED CLIPS(38). Ensure the links and clips are

completely closed and secured.

Attach LEG SPRINGS(36) to eyebolts at desired height with the LINKS(31). Attach the other ends of the

springs to the HAND STRAPS(21) with the DOUBLE ENDED CLIPS(38). Ensure the links and clips are

completely closed and secured.

Loop

The ROLL-DOWN BAR(39) attaches via the ARM SPRINGS

(35) to the EYEBOLTS(23) on the TOP BEAM(22) between

the two UPRIGHTS(7,9) with the LINKS(31). Attach the ARM

SPRINGS(35) to the ROLL-DOWN BAR(39) with the DOUBLE

ENDED CLIPS(38). Be sure the links and clips are completely

closed and secure.

NOTE:

There are three D rings on each end of the SAFETY

STRAP(37). Connect the SAFETY STRAP(37) with different D

rings to set the PUSH-THRU BAR(26) in different position.