STORAGE
1.To store the UX2 AIR BIKE simply keep it in a clean dry place.
2.The UX2 AIR BIKE is 42 1/2" long x 22 1/4" wide x 45 1/4" tall.
3.The UX2 AIR BIKE must be lifted for movement. Two people may be required.
4.To avoid damage to the electronics, remove the batteries before storing the UX2 AIR BIKE for one year or more.
MAINTENANCE
The safety and integrity designed into the UX2 AIR BIKE can only be maintained when the UX2 AIR BIKE is regularly examined for damage and wear. Special attention should be given to the following:
1.Verify that the Thin Nuts(35) are properly tightened to prevent the pedals from coming loose.
2.Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
3.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4.Worn or damaged components shall be replaced immediately or the UX2 AIR BIKE removed from service until repair is made. Only Stamina Products supplied components shall be used to maintain/repair the
UX2 AIR BIKE.
5.Keep your UX2 AIR BIKE clean by wiping with an absorbent cloth after use.
TROUBLE SHOOTING GUIDE
IT IS NOT NECESSARY TO RETURN ENTIRE BIKE FOR A MONITOR REPAIR. THE MONITOR IS REMOVABLE FROM BIKE FOR REPAIR OR REPLACEMENT.
| PROBLEM |
| CAUSE |
| CORRECTION |
|
|
|
|
|
|
1. | No display on monitor. | 1. | Batteries weak or dead. | 1. | Replace batteries. (Use two AA.) |
|
|
|
|
|
|
2. | No speed or distance displays | 1. | Pickup wire not connected to | 1. | Securely plug pickup wire into |
| on monitor. |
| monitor. |
| back of monitor. |
|
| 2. | Speed pickup not working | 2. | Replace speed pickup. |
|
|
| properly. |
|
|
|
| 3. | Monitor not working properly. | 3. | Replace monitor. |
|
|
|
|
|
|
3. | Chain makes popping noise. | 1. | Chain is too loose. | 1. | Adjust chain - See page 15 chain |
|
|
|
|
| adjustment. |
4. | Bike makes sudden loud noise. | 1. | Chain is too loose and hits fan. | 1. | Adjust chain |
|
|
|
|
|
|
5. | Bike rocks as you pedal. | 1. | Bike is not level. | 1. | Adjust leveling caps on front |
|
|
|
|
| stabilizer until bike is level. |
6. | Resistance too high. | 1. | Fan needs adjustment. | 1. | Adjust fan per instructions on |
|
|
|
|
| page 15 and 16. |
14
