ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
parts@staminaproducts.com
STEP 1
Insert REAR SUPPORT(2) into the MAIN FRAME(1) and fasten with ROUND HEAD SCREWS (M5x0.8x12mm)(57).
STEP 2
Attach FRONT STABILIZER(3) onto the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x38mm)(51), ARC WASHERS(M8)(71), and ACORN NUTS(M8x1.25)(64).
STEP 3
Turn the LEVELING CAPS(48) on the FRONT STABILIZER(3) as needed until bike is steady and not rocking.
6
