Standard Horizon CP180 Inserting a Waypoint Into a Route, Goto a Route, By select Route

Models: CP180

1 100
Download 100 pages 33.72 Kb
Page 57
Image 57

Point knob to the right. A popup window will be shown.

9. Move the ShuttlePoint knob up/down to change the characters and left/right to select a different character in the Routes Name.

10. When finished press [ENT] to save.

11. Press [CLR] to show the Chart page is shown.

9.3 INSERTING A WAYPOINT INTO A ROUTE

Place the cursor on the navigation line between two points and press [ROUTE]. Move the ShuttlePoint knob to the desired location of the Waypoint and press [ENT].

9.4GOTO A ROUTE

9.4.0By select Route

1.Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor) on the Chart page.

2.Press [GOTO] to show the GOTO popup window.

3.Move the ShuttlePoint knob to highlight ROUTE and press [ENT].

4.The SELECT ROUTE popup window will be shown.

5.Move the ShuttlePoint knob to the highlight the desired Route and press [ENT].

6.On the Chart page a circle with a Flag is shown on the first leg of the Route and a navigation line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the Route.

Figure 9.4.0 - Select a Route

9.4.1By Cursor key

1.On the Chart page move the ShuttlePoint knob until the cursor reaches the starting point of the Route.

2.Press [GOTO] to start following the Route.

3.Press [CLR] twice to revert to Home mode.

9.5OTHER SETTINGS IN ROUTE MENU

You will notice the ROUTE menu has other selections.

SELECT Choose an available Route to create or choose a stored Route to show and follow on the Chart page.

DELETE Deletes the Route when shown in the above SELECT menu.

REVERSE Reverses the Route, when chosen Starting point is at the end of the Route.

COLOR Allows changing the color of the navigation lines between in leg in the Route.

REPORT The Route Report menu is useful to show details of the Waypoints contained within the Route. This menu also allows you to enter in your average speed and fuel consumption and calculate the approximate fuel used when following the Route.

SEND

Sends the stored points to a external device (PC) capable of listening to NMEA RTE sentence.

RECEIVE

Receive the points from an external device (PC) capable of sending NMEA RTE sentence.

GPS Chart Plotters

Page 59

Page 57
Image 57
Standard Horizon CP180 owner manual Inserting a Waypoint Into a Route, Goto a Route, By select Route, By Cursor key