Battery Changing Instructions

S&G® Z03 D-DriveMulti-User Electronic Safe Lock

2005 Series

Step 4—Carefully slide the battery behind the keypad, into the cavity that is designed to hold it (Figure 4). Be sure the battery has dropped all the way to the bottom of the cavity.

Step 5—Gently place any excess wire into the cavity. Make sure it is not in a position to be caught between the keypad ring and the keypad base when the ring is pushed back against the base (Figure 5).

Step 6—Once the wires are safely positioned out of harm’s way, push the keypad ring back up against the base, then turn it clockwise until the yellow tab snaps back into its normal position (Figure 6).

Check your lock operation at least three times with the container

Figure 4

door open before closing it.

 

Figure 5

Figure 6

Page 10

© Copyright 2006, Sargent & Greenleaf

Page 10
Image 10
Stanley Black & Decker 2005 Series manual Battery Changing Instructions