Stanley Black & Decker EP30250 user manual Accessories EP300, Brazing

EP30250 OPERATION

-Press carefully the gun with the cable shoe, the ferrule and the brazing pin to the work piece.

-Note that you always must use a railbond together with the brazing pin and the ferrule to do a pin brazing, except when brazing a special threaded brazing pin then only a ferrule and M8, M10 or M12 brazing pin is to be used.

-Make sure to braze in the top of the hole when brazing to a vertical surface.

Brazing.

-Hold the gun firmly with both hands as shown and pull the trigger just once.

The electronic will by it self finish the brazing process.

-Hold the gun in place for 3-4 sec after the brazing while the braze freezes.

-Remove the gun straight backwards without

pulling the trigger!

Knock off the shank of the brazing pin.

The brazing is completed.

ACCESSORIES EP300

SEE PAGE 17

Pin holder 8-9,5 mm (A)

Pin holder M8 (B)

Pin holder M10 (C)

Pin holder M12 (D)

Ring holder 8-9,5 mm

Ring holder M8/M10/M12

12 ► EP30200 / EP30250 User Manual