EP30250 OPERATION
3. Brazing instruction.
WARNING
Warning! Always use eye protectors when grinding and brazing!
Note, use only STANLEY´s grinding wheel specially made for brazing, other type of wheels will leave a surface not suitable for brazings. Keep the grinding wheel clean and free from oil etc.
IMPORTANT
- Grind the brazing and grounding area until you have an even and clean surface
Move the grinder up and down until you have an even surface for both the pinbraze and ground magnet.
-Attach the earth magnet on the same rail/work piece where the pinbrazing should be done. Try to attach the magnet within 0,5m from brazing area.
- Set pintype: | Setting |
Pin | |
8 mm std | 1 |
8 mm Extra | 2 |
9,5 mm | 3 |
- Load the gun with brazing pin and ferrule.
EP30200 / EP30250 User Manual ◄ 11
