Stanley Black & Decker manual Specifications, HP TWIN8 SPECIFICATIONS

SPECIFICATIONS

HP TWIN8 SPECIFICATIONS

Engine:	27 hp OHV, Briggs & Stratton Engine
Output Capacity (Dual 5 or Dual 8 Circuits)	Two 5 gpm/20 lpm Circuits or Two 8 gpm/30 lpm Circuits
Length:			37.5 in./95.25 cm
Width:			25.75 in./65.4 cm
Height:				30 in./76.2cm
Weight (Wet):			360 lbs/163 kg
Fuel Tank Capacity:			4.7 gal./17.8 ltr
Estimated Gas Consumption Per Hour				2.5 gal/9.4 ltr
Hydraulic Reservoir Capacity:			3.2 gal./12.1 ltr
Relief Valve “Crack” Setting			2100 psi/145 bar
Full Relief Setting			2500 psi/172 bar
Nominal Pressure			1500 psi/103 bar
Max Pressure			2000 psi/138 bar
Circuit Type				Open Center
HTMA/EHTMA Category				Type 1 and 2
		C			D

POWER UNITS & GAS/FUEL DRIVEN EQUIPMENT: A1. Federal Emission Component Compliance 40CFR part 1060.120 Stanley warrants all fuel system emission components for 2 years from the date of original purchase provided there has been no abuse, neglect, modifications, or improper maintenance.

Components covered. The emission-related warranty covers all components whose failure would increase the evaporative emissions. Your emission-related warranty does not cover components whose failure would not increase evaporative emissions. Coverage under this warranty extends only to the following parts; fuel tank, fuel cap, fuel hose and vapor hose from the fuel tank to the engine and any connectors that are apart of the fuel system.

The equipment is designed, built, and equipped so it conforms at the time of sale to the ultimate purchaser and each subsequent purchaser and is in compliance with 40 C.F.R. 1060.120 standards. The equipment is free from defects in materials and workmanship that may keep it from meeting these requirements.

18 ► HP TWIN8 User Manual