Star Micronics IFBD-HW03/04 3.5. , Other Specifications

IFBD-HW03/04 Product Specifications Rev. 0.00

3.5.

3.5.1.

Other Specifications

DIP Switches and LED Specifications

The DIP switches on this product startup the flash memory loader when only the first switch is ON at

startup.

After the power is turned on, the product checks the status of the DIP switches. If switch #1 is on, the

system enters flash memory load mode. In the load mode, the status LED flashes in approximately

1 second cycles. Switch #2 can determine the wireless mode at this time.

If switch #1 is off, the system starts an application written to the flash memory. By setting switch #2

to on, it is possible to set the default settings at this time.

The following table shows the allocation of operations to each status of the DIP switches.

DIP Switches

SW-1 SW-2 Operation

OFF OFF Normal startup

OFF ON Initialize setting information

ON OFF Startup loader (Infra mode)

ON ON Startup loader (Adhoc mode)

3.5.2. Flash ROM Specifications

It is possible to update the product program region by uploading firmware from the network using the

flash memory loader. Normally, this is used to upgrade, but it is also possible to downgrade when

developing products or testing.

FLDP (an independent protocol) and FTP are used as the protocols for upgrading firmware.

• Use a tool dedicated for upgrading using our FLDP. Upload data (extension: .bin) for

the version upgrade in binary format.

• Use any general FTP client to upgrade using FTP. Log in, upload data (extension: .bin)

for the version upgrade in binary format to the “flash” directory. TCP/IP is used, so it is

not possible to startup the product in loader mode using the DIP switch operations.

• If not specified in particular, no initialization of the NIC settings is necessary after

upgrading.

3-32

Contents

Main Product Specifications Manual WiFi Ethernet I/F Card IFBD-HW03/04 Rev. No. 0.00 Star Micronics Co., Ltd. Special Products Operating Division Page Page IFBD-HW03/04 Product Specifications Rev. 0.00 1. Read First 1-1 1.1. 1.1.4. 1.1.1. 2. Hardware 2.1. Supporting Destination for Wireless Units 2.2. Sub-chassis (Brackets Mounted to Printer) 2.3. Specifications Page IFBD-HW03/04 Product Specifications Rev. 0.00 3. Mechanical Specifications 3-1 3.1. 3.2. Features General Description 3.3. Protocols 3-2 IFBD-HW03/04 Product Specifications Rev. 0.00 3-3 3.3.1. Setting the IP Addresses IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.1.1. DHCP/BOOTP 3-4 3.3.1.2. RARP IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.1.3. ARP 3-5 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.2. LPD Specifications 3-6 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.3. Raw Mode Print (TCP #9100) Specifications 3-7 3.3.4. TELNET Specifications 3.3.5. HTTP Specification 3.3.6. FTP Specification IFBD-HW03/04 Product Specifications Rev. 0.00 3-11 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.6.1. Printing Mechanism Using FTP 3-12 3.3.6.2. Setting Mechanism Using FTP Page IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.6.3. Updating Firmware Using FTP 3-14 3.3.6.4. Example of the Procedures for Updating the Firmware of the Product Using FTP IFBD-HW03/04 Product Specifications Rev. 0.00 3-15 Page IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.7. 3.3.8. IPP 3-17 DNS Specification 3.3.8.1. IPP Job Detail Specifications 3.3.8.3. Secure Communications (SSL) Printing Function Specifications Basic Specifications https://192.168.1.1/ 3-18 3.3.9. POP3 Specifications 3.3.9.1. Print Specifications 3.3.9.2. Restrictions 3.3.9.3. Filter Definition Character String 3.3.10. SMTP Specification 3.3.10.1. Transmission Message Format IFBD-HW03/04 Product Specifications Rev. 0.00 Continued from previous page 3-21 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.11. Universal Setting Function 3-22 Page 3.4.2. SNMP Specification 3.4.2.1. Support MIB Page Page Page Page Page Page 3.4.2.2. TRAP Occurrence Phenomenon 3.5. 3.5.1. Other Specifications DIP Switches and LED Specifications 3.5.2. Flash ROM Specifications 3.5.3. Self-Diagnosis Function Specifications 3-33 Page 3.6. 3.6.1. Wireless Settings 3.6.3. 3.6.2. 3.6.4. POP3 (Email Reception) Settings 3.6.4.1. Basic Settings 3.6.4.2. Account Settings For Each User (User Profile 1 to 4) 3.6.5. SMTP (Email Sending) Settings 3.6.5.1. Basic Settings 3.6.5.2. Event to Address Settings 3.6.6. SNMP Settings 3.6.7. Secure Print Settings 3.6.8. RAS Counter Settings 3.6.9. Memory Switch Settings 3.6.10.2. Time Limit Settings 3.7. 3.7.1. Status Display Printer Status Display IFBD-HW03/04 Product Specifications Rev. 0.00 3.7.2. System Status Display 3-39 Display Example Distributed by