IFBD-HW03/04 Product Specifications Rev. 0.00
The FTP of this product conforms to RFC959.
It is possible to specify ASCII (A), BINARY (I) or TENEX (L 8) as the transmission mode, but the
differences in the modes is not handled by the product, and depends on the client side.
There are multiple accounts for setting items necessary for logging in by the client. It supports the
user names and passwords outlined in the table below.
Account User Name Password Targ e t
Root User root
• No differentiation between
upper and lower case
characters
Can be set
• Seven or more char. of ASCII
• Initial Value: No characters
• No differentiation between upper and
lower case characters
System controllers
User (Any ASCII character string) None General users
The following outlines the directory configuration.
* The files in each directory are dummies.
It is possible for the same actions by reading and writing with any filename, if in the same directory.
/
|─lp/
| print.dat
|
|─config/
| config.txt
|
|─flash/
fwdata.bin
Port Name Manufacturer Permission
Root User Permission User Permission Functions
lp Writable Writable
Print port
It is possible to print the contents of the file by
uploading it to this directory.
config Readable
Writable Readable
Setting function
* See section 2.6.2 Setting Functions Using FTP
flash Writable
Firmware update port
* See section 2.6.3 Updating Firmware Using FTP
3-10