Star Micronics IFBD-HW03/04 - page 41

IFBD-HW03/04 Product Specifications Rev. 0.00

:DISABLE

<< Configure SNMP >>

[Authentic Community]

:"******"

[Trap Community]

:"public"

[Trap Address(IP)]

:0.0.0.0

[SysContact]

:""

[SysName]

:""

[SysLocation]

:""

[EnableAuthenTrap]

:2

<< Configure Secure Print >>

[Secure Print]

:ENABLE

[SSL Mode]

:ALL

“*** Diagnostic report ***”

The following shows the self-diagnosis print.

When an error is detected at startup, ”*** Hardware problem report ***” is printed.

<ROM check: Explanation of results of ROM check sum inspection>

First Digit Second Digit Third Digit Fourth Digit

Sum value described in

ROM

Sum value actually calculated Always 0 Always 0

NIC check: Shows the results of an NIC packet transmission test. Also, prints the

MAC address.

<EEPROM check: Results of EEPROM check sum inspection>

First Digit Second Digit Third Digit Fourth Digit

Sum value described in

EEPROM

Sum value actually calculated Always 0 Always 0

*** Configuration report ***

The following information indicates the environment setting information stored in the

product.

In environment setting printing, when the protocol stack is disabled, information relating

to the disabled protocol is not output.

(The printing example above is the output result using default settings.)

3-34

Contents

Main Product Specifications Manual WiFi Ethernet I/F Card IFBD-HW03/04 Rev. No. 0.00 Star Micronics Co., Ltd. Special Products Operating Division Page Page IFBD-HW03/04 Product Specifications Rev. 0.00 1. Read First 1-1 1.1. 1.1.4. 1.1.1. 2. Hardware 2.1. Supporting Destination for Wireless Units 2.2. Sub-chassis (Brackets Mounted to Printer) 2.3. Specifications Page IFBD-HW03/04 Product Specifications Rev. 0.00 3. Mechanical Specifications 3-1 3.1. 3.2. Features General Description 3.3. Protocols 3-2 IFBD-HW03/04 Product Specifications Rev. 0.00 3-3 3.3.1. Setting the IP Addresses IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.1.1. DHCP/BOOTP 3-4 3.3.1.2. RARP IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.1.3. ARP 3-5 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.2. LPD Specifications 3-6 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.3. Raw Mode Print (TCP #9100) Specifications 3-7 3.3.4. TELNET Specifications 3.3.5. HTTP Specification 3.3.6. FTP Specification IFBD-HW03/04 Product Specifications Rev. 0.00 3-11 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.6.1. Printing Mechanism Using FTP 3-12 3.3.6.2. Setting Mechanism Using FTP Page IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.6.3. Updating Firmware Using FTP 3-14 3.3.6.4. Example of the Procedures for Updating the Firmware of the Product Using FTP IFBD-HW03/04 Product Specifications Rev. 0.00 3-15 Page IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.7. 3.3.8. IPP 3-17 DNS Specification 3.3.8.1. IPP Job Detail Specifications 3.3.8.3. Secure Communications (SSL) Printing Function Specifications Basic Specifications https://192.168.1.1/ 3-18 3.3.9. POP3 Specifications 3.3.9.1. Print Specifications 3.3.9.2. Restrictions 3.3.9.3. Filter Definition Character String 3.3.10. SMTP Specification 3.3.10.1. Transmission Message Format IFBD-HW03/04 Product Specifications Rev. 0.00 Continued from previous page 3-21 IFBD-HW03/04 Product Specifications Rev. 0.00 3.3.11. Universal Setting Function 3-22 Page 3.4.2. SNMP Specification 3.4.2.1. Support MIB Page Page Page Page Page Page 3.4.2.2. TRAP Occurrence Phenomenon 3.5. 3.5.1. Other Specifications DIP Switches and LED Specifications 3.5.2. Flash ROM Specifications 3.5.3. Self-Diagnosis Function Specifications 3-33 Page 3.6. 3.6.1. Wireless Settings 3.6.3. 3.6.2. 3.6.4. POP3 (Email Reception) Settings 3.6.4.1. Basic Settings 3.6.4.2. Account Settings For Each User (User Profile 1 to 4) 3.6.5. SMTP (Email Sending) Settings 3.6.5.1. Basic Settings 3.6.5.2. Event to Address Settings 3.6.6. SNMP Settings 3.6.7. Secure Print Settings 3.6.8. RAS Counter Settings 3.6.9. Memory Switch Settings 3.6.10.2. Time Limit Settings 3.7. 3.7.1. Status Display Printer Status Display IFBD-HW03/04 Product Specifications Rev. 0.00 3.7.2. System Status Display 3-39 Display Example Distributed by