Loading fanfold paper 11
far apart). After making these adjustments, be sure that you re-lock the
tractors by pulling the gray levers into the locked position.
❏Close the rear cover and press down gently on it until it locks into place
with a click.
Note:
If you removed the rear cover , fir st insert its two tabs into the holes provided in
the back of the printer and then swing it closed.
❏Install the paper guide so that it lays down flat as shown below. In this
position, the paper guide keeps the printed paper separate from the
unprinted paper.
❏Turn on the printer.
The printer will beep a number of times to indicate that paper is not loaded
properly. Also, the control panel’s POWER indicator flashes whenever
paper is not loaded.