– 14 –
ENGLISH
4While observing the direction of the
roll, set the paper roll into the hol-
low as shown in Fig. 6-5.
5Insert the edge of the paper into the
paper feeder. If inserted correctly,
the edge of the paper will pass
through the paper exit.
6Insert the top edge of the paper into
the tear bar slot, then mount the cover
by reversing the procedure for re-
moving the cover in step 1 above.
Note: When the paper end mark ap-
pears on the paper, replace the
roll paper before it runs out.
Fig. 6-5 Setting the paper
Fig. 6-6 Loading the paper
Fig. 6-7
Roll paper
Roll paper
Tear bar
Paper feeder
Paper exit