– 16 –
ENGLISH
4Place the ribbon cartridge in the
direction shown in Fig. 6-10 and
press it down to load it. If loading of
the ribbon cartridge is not satisfac-
tory, press down the cartridge while
rotating the ribbon feed knob in the
direction of the arrow.
5Turn the ribbon feed knob of the
ribbon cartridge in the direction of
the arrow to remove slack in the
ribbon.
6Close the Auto Cutter.
7Mount the cover by reversing the
procedure outlined in step 2 above.
8When removing the ribbon cartridge,
raise the A section and then remove
it by holding the B section as shown
in Fig. 6-11.
Fig. 6-10 Loading the ribbon cartridge
Fig. 6-11 Removing the ribbon cartridge
Ribbon separater
Print head
Ink ribbon
Ribbon
feed knob
Notched
part
Ribbon
cartridge
A
B
Auto cutter