Star Micronics TSP2000 Appendix A Specifications, A-1. General Specifications, Print Area

	Appendix A: Specifications
A-1. General Specifications
(1) Printing method	Direct line thermal printing
(2) Print speed	Max. 75 mm/s
(3) Dot density	203 dpi: 8 dots/mm (0.125 mm/dot)
(4) Number of print columns
	48 (12 × 24 dots)
	64 (9 × 24 dots): ESC/POS mode only
(5) Roll paper	Refer to chapter 3 for details on the recommended
	paper.
	Paper width: 80- 1.00 mm
	Roll diameter: ø90 mm or less
	External diameter of core: ø18 +0.50 mm
	Internal diameter of core: ø12 ± 0.5 mm
(6) Bar codes	UPC-A, UPC-E, JAN 13 (EAN), JAN 8 (EAN),
	CODE 39, CODE 93, CODE 128, ITF, CODA BAR
(7) Sensor	Paper end, cover open, paper near end, abnormal
	print head temperature
(8) Overall dimension	144 (W) × 195 (D) × 138 (W) (mm)
(9) Weight	Approx. 1.48 kg

Print Area
	1 to 2			Cutter position
Paper				*	19
	1		576	1	.6±1
feed	4±1	72±0.2	4±1	Print head
direction		Paper width		printing position
		Print area
		0
		80 -1
	0.125
	0.
	125	576 dots
	Print area 72±0.2
				Unit : mm

Note *1 Since the firmware automatically feeds the paper 5 mm after it is cut, the top cutter margin becomes 24.6±1.

APPENDIX

– 87 –