Star Micronics TSP2000 A-2. Print Specifications, A-3. Auto Cutter Specifications, A-4. Interface

APPENDIX

A-2. Print Specifications

(1) Print width	72 mm (576 dots)
(2) Character size	Front A: 1.50 × 3.00 mm
	Front B (ESC/POS mode only): 1.13 × 3.00 mm
(3) Character structure	Front A: 12 × 24 dots
	Front B (ESC/POS mode only): 9 × 24 dots
(4) Character set	ASCII:	96
	Extended graphics:	128 × 8
	International:	32

A-3. Auto Cutter Specifications

(1) Partial cut	Cutting with one point left uncut
(2) Cutting frequency	Max. 30 cuts per minute
(3) Thickness of paper	Max. 0.08 mm

A-4. Interface

(1) Interface	RS232C serial interface or Two-way parallel inter-
	face (IEEE1284)
(2) Command	ESC/POS TM commands or Star commands

A-5. Power Supply

(1) AC Adaptor	UP06021240, switching type
(2) Input	100 to 240V AC, 50/60 Hz
(3) Output	DC 24V±5%, 2.5A MAX
(4) Power Consumption	Operating: Approx. 65 VA (at print duty 14%)
	Stand-by: Approx. 5 VA
(5) Power Connector

Pin No.	Signal	Function	I/O
	name		direction	1 3
1	+24V	Drive power	IN
				2
2	SG	Signal GND
3	N.C.

<Viewed from Connector Surface>

Note 1: This power connector is used to supply the control and mechanical sections of the printer.

– 88 –