– 13 –
2. DIP-switch values
(1) RS-232C interface
a. Interface board Ver.1
This board has a single 8-bit DIP switch.The factory default settings are all ON.
Switch Setting ON OFF
1-1 Baud See table below
1-2
1-3 Handshake DTR XON/XOFF
1-4 Data 8 bits 7 bits
1-5 Parity No parity Enabled
1-6 Parity Odd Even
1-7 DC1/DC3 Disabled Enabled
1-8 Power ON See table below
Baud 1-1 1-22400BPS OFF OFF
4800BPS OFF ON
9600BPS ON ON
19200BPS ON OFF
Mode 1-8 ON Power On
DC1/DC3 Disabled Disabled Printer selected
DC1/DC3 Disabled ON Printer selected
OFF Printer de-selected
Addressable ON Printer de-selected
OFF Printer selected
b. Interface board TUP400 Ver.2 and TUP400Z
This board had two DIP switches : One 10-bit switch and one 4-bit switch.
The factory default settings are ON except for switches 1-9 and 1-10.
Switch Setting ON OFF
1-1 Baud See table above
1-2
1-3 Handshake DTR XON/XOFF
1-4 Data 8 bits 7 bits
1-5 Parity No parity Enabled
1-6 Parity Odd Even
1-7 DC1/DC3 Disabled Enabled
1-8 Not used
--
1-9 Not used
--
1-10 Not used
--
Switch Setting ON OFF
2-1 Automatic Status Back function Invalid Valid
2-2 Not used
--
2-3 Not used
--
2-4 Not used
--